You have no items in your shopping cart.
$225.00
To continue to meet the increasing needs for performance while maintaining exceptional value and flexibility,the Cisco 7200 Series introduces its newest processor-the NPE-G1. The Cisco 7200 Series Network Processing Engine...
To continue to meet the increasing needs for performance while maintaining exceptional value and flexibility,
the Cisco 7200 Series introduces its newest processor-the NPE-G1. The Cisco 7200 Series Network Processing Engine NPE-G1 (NPE-G1) addresses the
the Cisco 7200 Series introduces its newest processor-the NPE-G1. The Cisco 7200 Series Network Processing Engine NPE-G1 (NPE-G1) addresses the
To continue to meet the increasing needs for performance while maintaining exceptional value and flexibility,
the Cisco 7200 Series introduces its newest processor-the NPE-G1. The Cisco 7200 Series Network Processing Engine NPE-G1 (NPE-G1) addresses the demand for performance and flexibility by doubling its processing capacity and enabling unprecedented LAN performance. Benefits of the NPE-G1 include the following.
• Provides performance of up to 1 million packets per second (PPS) in Cisco Express Forwarding switching (an increase of up to 250 percent over the Cisco 7200 Series NPE-400)
• Offers three Gigabit Ethernet/Fast Ethernet ports that do not take up bandwidth points
• Doubles the amount of available DRAM (to 1 GB)
• Eliminates the requirement for an input/output (I/O) controller
• Eliminates I/O controller LAN interface bandwidth points
• Provides modular processors and the ability to upgrade
• Offers improved price performance
Connectivity
Gigabit Ethernet ports: Three 10/100/1000 ports are available on the NPE-G1. Either copper or fiber is available.
• Gigabit Ethernet port features: all three ports support the IEEE 802.1Q standard.
• NPE-G1 supports three types of GBICS: SX, LX/LH, and ZX for varying fiber length requirements.
• Console and auxiliary ports: Because the NPE-G1 has a console port and an auxiliary port, and handles the other functionality of the I/O controller, the need for an I/O controller is eliminated. However, an I/O controller can still be used. If an I/O controller is detected in the I/O controller slot, I/O controller functionality defaults to the I/O controller (with the exception of Non-volatile Random Access Memory [NVRAM] and boot flash). The console and auxiliary ports of the NPE-G1 are then disabled.
Memory
• SDRAM: 256 MB (default), 512 MB, and 1 GB. There are two DRAM memory slots, so 256 MB of memory consists of two 128 MB memory SODIMMs, 512 MB consists of two 256 MB memory SODIMMs, and 1 GB consists of two 512 MB memory SODIMMs. It is necessary to have the same size SODIMM in each memory bank on an NPE-G1. The type of DRAM memory being used on the NPE-G1 is double data-rate (DDR) memory. DDR memory provides high-performance memory access rates.
• Compact flash: 64 MB (default), 128 MB, and 256 MB. The compact flash used on the NPE-G1 is the same compact flash used with the Cisco 7400 and 7300 series Internet routers.
• 512 KB NVRAM or 512 KB.
• 512 KB Layer 2 cache.
• 16 MB packet memory on 256 MB SDRAM and 32 MB packet memory on 512 MB and 1 GB SDRAM.
• ECC support (SDRAM and Layer 2 cache).
Processor
700 MHz Broadcom BCM1250 processor.
We prefer to ship UPS or FedEx, we also can ship DHL or US Postal Service. We can usually have it to your location overnight if needed. Additional Fee(s) may apply for special shipping. All equipment will ship from our warehouse located at our office in Springfield, MO. We can also ship overseas if needed and we only charge exact shipping costs. For most customers outside the USA and Canada, wire transfer is the only form of payment we will accept. Overseas customers can either arrange to have the equipment picked up in the USA or we will ship to your location by FedEx. We can also ship to a freight forwarder here in the USA. The purchaser will be required to pay for taxes and duties through customs in your home country.
